ROFU® MAGNETIC DOOR LOCKING DEVICE
MODEL 8122-002 FOR SINGLE DOOR

STANDARD FEATURES

Holding Force: 3000 lbs. (1500 lbs. each magnet)
Easy Installation:
-		 Versatile mounting brackets for new and existing doors and frames.
Sensor:
 -		 Built-in Hall effect crystal affected by door position, voltage input and magnetic field strength.
LED:
 -		 Red/Green LED door status indicator is attached to magnet housing.
Fail Safe:
 -		 Releases instantly when power is disconnected.
No residual magnetism.
Fail Alarm: May be released upon activation of fire alarm.
Housing: Attractive, heavy duty, anodized extruded aluminum
 Voltage: 12VDC or 24VDC (field adjustable)
Current Draw:
 -		 450 mA at 12 VDC per block
250 mA at 24 VDC per block
Mounting hardware included with unit.
Limited Lifetime Warranty.

SPECIFICATIONS

Magnet Size: 83" x 2-5/8" x 1-5/8" (LxHxW)
Armature Size: 7-1/4" x 2-3/8" x 5/8" (LxHxW)
Finish: US28 - Aluminum

OPTIONAL FEATURES

Door Status
and
Power Switch

The magnet contains a built - in “C” Form contact 5 Amps @24V that is activated by power to the lock and contact between the armature plate and the surface of the lock. It indicates that the power is on and the door is closed. This feature can be used for remote door surveillance, indicator lights and interlocks.

 

TYPICAL INSTALLATION ROFU® MODEL 8122-002

 

      1. ROFU Magnet 8122-002 with door status and tamper switch.
      2. Armature Plate
      3. DC power supply
      4. Access Controls - key switch
      5. Request to exit button
      6. Remote release

 

Switch or solid state switching device

Important: The local on\off switch must be
wired between DC source and magnet.

Switch or solid state
switching device

Note: Not to scale. Technical Data are subject to change without notice.
Dimensions in Inches and Millimeters.